What is Grade 80 lifting chain

What is the Grade 80 lifting chain?

Grade 80 chain is a heat-treated alloy steel designed for high strength for overhead lifting and tie-down applications. It is the most economical of the three chain grade types that are suitable for overhead lifting (grade 80, grade 100, grade 120).

Alloy steel material, heat treated.
Black oxidation zinc plated self-colour
Conforms to BS EN 818-2.
Working temperature range: -40 °C to +400 °C (Reductions in W.L.L apply).
Marked with manufacturers identification and material grade.

If you need more information, please don't hesitate to contact us.

www.chinatoplifting.com tracy@chinatoplifting.com

此博客中的热门博文

Australian Standard Webbing Slings & Round Slings |AS1353 & AS4497

In the Australian market, lifting slings are essential tools in hoisting and material handling operations, and their safety and performance must comply with strict national standards. Australia’s lifting sling standards primarily include AS 1353 and AS 4497 , which apply to webbing slings (flat slings) and roundslings , respectively. www.chinatoplifting.com tracy@chinatoplifting.com Overview of Applicable Standards Sling Type Standard Standard Title Webbing Sling AS 1353.1 / AS 1353.2 Flat synthetic webbing slings – Manufacture & Use Roundsling AS 4497.1 / AS 4497.2 Synthetic roundslings – Manufacture & Use Structure & Material Differences Webbing Slings Structure : Made from one or more layers of woven polyester webbing. Common designs include flat type, eye type, and reinforced eye type. Features : Lightweight and flexible Easy to store and fold Wide contact area to avoid damage to loads Compatible with corner protectors for...

阅读全文

What is the jack? How hydraulic jack work?

A jack is a device that uses force to lift heavy loads. The primary mechanism with which force is applied varies, depending on the specific type of jack, but is typically a screw thread or a hydraulic cylinder. Jacks can be categorized based on the type of force they employ: mechanical or hydraulic. Mechanical jacks, such as car jacks and house jacks, lift heavy equipment and are rated based on lifting capacity (for example, the number of tons they can lift). Hydraulic jacks tend to be stronger and can lift heavier loads higher, and include bottle jacks and floor jacks. How Hydraulic Jacks Work Hydraulic jack depends on force generated by pressure. Essentially, if two cylinders (a large and a small one) are connected and force is applied to one cylinder, equal pressure is generated in both cylinders. However, because one cylinder has a larger area, the force the larger cylinder produces will be higher, although the pressure in the two cylinders will remain the same. Hydraul...

阅读全文

Cam buckle Operating Instructions

How to use the cam buckle Cam buckle To Tighten When the end fittings of the Cam Buckle assembly are properly in place, push and apply pressure to the area on the Cam Buckle printed, "PRESS". Pull webbing slack through the buckle. Tighten the strap by pulling the webbing through the Cam Buckle until the desired tension is complete. By releasing pressure from the area marked "PRESS", the Cam Buckle Assembly will be locked in place. To Release To release, apply pressure to the area on the Cam Buckle printed, "PRESS", and pull the webbing away from the Cam Buckle . More information, please don't hesitate to contact us. www.chinatoplifting.com tracy@chinatoplifting.com

阅读全文

Top Lifting

搜索此博客