Top Lifting

Instruction of the use of webbing sling and round sling EN1492-2 Round Sling 1. Check visually for obvious damage before every use 2. Webbing- and round slings are not allowed to be surcharged. Observe the label indicating the max load. 3. Webbing- and round slings must not be noted. 4. Webbing- and round slings must not have any irregularities while loaded. They must be tense. 5. Protect webbing- and round slings from sharp edges. In case, use protectors. 6. Do not expose webbing- and round slings to rubbing the surface. 7. Webbing- and round slings are chemical-proof against many acids and alkaline solutions.  8.Temperature range: -40en +100C, (as long as no chemical get in touch with webbing- and round slings) 9. Webbing- and round slings need to be laid to the crane hook with the complete width. No twist, no necking! 10. Avoid to charging abruptly. How do I know if my webbing slings or round slings are broken? Label must always be readable The ma...

The usage and features of the ratchet straps The ratchet straps are used when the goods are transported, moved, shipped or stored. They are locked, do not fall off, safe, reliable, lightweight, easy to operate, protect the object from damage. Can be based on different hook type, applicable to all kinds of environment. Also known as bundles, fasteners, fastening belt, military straps. Features: 1, save time and effort, the product to dial the situation, one person can make the operation of a large bundled binding force, fast lifting. 2, safe and durable, this product uses special steel for the mechanical parts, strong acid, and alkali fibre material combination. 3, easy to operate, instantly tightened, never fall off, instantly loose, easy to operate, easy to recover baggage, do not take up space. 4, do not hurt the goods, the product is made of fibrous material flat ribbon combination, the force point scattered, soft, never hurt the goods. In the transport of goods, movin...

How To Use the Ratchet Buckle ratchet buckle To Tighten: When the end fitting of the ratchet is properly in place, pull the webbing slack through the slot in the ratchet mandrel. Tighten the strap by ratcheting the handle up and down until secure. A minimum of two turns of webbing should be around the mandrel after tensioning. To secure the ratchet in a lock position, pull the handle down against the frame. To Release: To release, pull back on latch lock handle and rotate the handle approximately 180 degrees. At this point, the web will easily slip out of the ratchet. More information, please contact us. www.chinatoplifting.com  tracy@chinatoplifting.com

How to use the cam buckle Cam buckle To Tighten When the end fittings of the Cam Buckle assembly are properly in place, push and apply pressure to the area on the Cam Buckle printed, "PRESS". Pull webbing slack through the buckle. Tighten the strap by pulling the webbing through the Cam Buckle until the desired tension is complete. By releasing pressure from the area marked "PRESS", the Cam Buckle Assembly will be locked in place. To Release To release, apply pressure to the area on the Cam Buckle printed, "PRESS", and pull the webbing away from the Cam Buckle . More information, please don't hesitate to contact us. www.chinatoplifting.com  tracy@chinatoplifting.com

What is the Grade 80 lifting chain? G80 lifting chain Grade 80 chain is a heat-treated alloy steel designed for high strength for overhead lifting and tie-down applications. It is the most economical of the three chain grade types that are suitable for overhead lifting (grade 80, grade 100, grade 120). Alloy steel material, heat treated. Black oxidation zinc plated self-colour Conforms to BS EN 818-2. Working temperature range: -40 °C to +400 °C (Reductions in W.L.L apply). Marked with manufacturers identification and material grade. If you need more information, please don't hesitate to contact us. www.chinatoplifting.com  tracy@chinatoplifting.com