跳至主要内容

Ratchet buckle Operating Instructions

How To Use the Ratchet Buckle

To Tighten:

When the end fitting of the ratchet is properly in place, pull the webbing slack through the slot in the ratchet mandrel. Tighten the strap by ratcheting the handle up and down until secure. A minimum of two turns of webbing should be around the mandrel after tensioning. To secure the ratchet in a lock position, pull the handle down against the frame.

To Release:

To release, pull back on latch lock handle and rotate the handle approximately 180 degrees. At this point, the web will easily slip out of the ratchet.


More information, please contact us.
www.chinatoplifting.com  tracy@chinatoplifting.com
标签：

评论

发表评论

此博客中的热门博文

Cam buckle Operating Instructions

How to use the cam buckle Cam buckle To Tighten When the end fittings of the Cam Buckle assembly are properly in place, push and apply pressure to the area on the Cam Buckle printed, "PRESS". Pull webbing slack through the buckle. Tighten the strap by pulling the webbing through the Cam Buckle until the desired tension is complete. By releasing pressure from the area marked "PRESS", the Cam Buckle Assembly will be locked in place. To Release To release, apply pressure to the area on the Cam Buckle printed, "PRESS", and pull the webbing away from the Cam Buckle . More information, please don't hesitate to contact us. www.chinatoplifting.com  tracy@chinatoplifting.com
发表评论
阅读全文